5365-00-854-3047

Shim email this page

Images

Reference images of this national stock number

Model or part number: 783890-1

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Differential Pinion NSN 5365-00-854-3047.

NSN 5365-00-854-3047 Datasheet

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

0.108 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

1.600 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

0.600 inches

MRC:

A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ

Inside Corner Radius:

0.075 inches

MRC:

None.ADPW

Outside Corner Radius:

0.160 inches

MRC:

A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE

Aperture Width:

0.420 inches

MRC:

A measurement of the longest dimension of an aperture,in distinction from width.ADUF

Aperture Length:

1.100 inches

MRC:

A measurement of the center to center distance between the bolt holes along the length.ADUZ

Center To Center Distance Between Bolt Holes Along Length:

1.388 inches

MRC:

None.ADVD

Outside Edge To Bolt Hole Center Distance Along Width:

0.144 inches

MRC:

None.ADVE

Outside Edge To Bolt Hole Center Distance Along Length:

0.300 inches

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

MRC:

The structural characteristic of the item.CQCF

Construction:

One-piece

MRC:

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM

Hardness Rating:

71.0 rockwell b

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Aluminum alloy 2024

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-a-250/5, t3 federal specification all material responses

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Non-circular w/bolt holes

MRC:

The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV

Fsc Application Data:

Sight, gun, receiver-indicator, infrared

MRC:

NIIN:

008543047

MRC:

NATO Stock Number:

5365-00-854-3047

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A07000

MRC:

INC:

20349

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5365-00-854-3047

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7507200000

NAICS:

332919

End Use Class:

12300

SITC:

68322

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7507200000

Tube Or Pipe Fittings Of Nickel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 68322

Nickel and Nickel Alloy Tubes, Pipes and Tube Or Pipe Fittings (e.g. Couplings, Elbows and Sleeves)

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

133300

NMF Description:

Machinery/machines Noi

UFC:

63220

LTL:

Rating variable

LCL:

92.5

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 98897

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
783890-1	2	XX	X	98897

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5365-00-854-3047

Images

Pricing & Availability

NSN 5365-00-854-3047 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »