change location
321-802-5889
321-733-7477
Model or part number: 70652-02151-101
This product is available in the following quantities and conditions.
Total: 674 Note: Availability of this item was last updated 05/01/2024, and may have changed since then. Request a quote for up to date pricing and availability.
Differential Pinion NSN 5365-01-117-7694.
NSN 5365-01-117-7694 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 10/15 | 11/15 | 12/15 | 01/16 | 02/16 | 03/16 | 04/16 | 05/16 | 06/16 | 07/16 | 08/16 | 09/16 | 10/16 | 11/16 | 12/16 | 01/17 | 02/17 | 03/17 | 04/17 | 05/17 | 06/17 | 07/17 | 08/17 | 09/17 | 03/17 | 04/17 | 05/17 | 06/17 | 07/17 | 08/17 | 09/17 | 10/17 | 11/17 | 12/17 | 01/18 | 02/18 | 03/18 | 04/18 | 05/18 | 06/18 | 07/18 | 08/18 | 09/18 | 10/18 | 11/18 | 12/18 | 01/19 | 07/18 | 08/18 | 09/18 | 10/18 | 11/18 | 12/18 | 01/19 | 02/19 | 03/19 | 04/19 | 05/19 | 06/19 | 07/19 | 08/19 | 09/19 | 10/19 | 11/19 | 12/19 | 01/20 | 02/20 | 03/20 | 04/20 | 05/20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 123.00 | 122.00 | 121.00 | 120.00 | 118.00 | 117.00 | 116.00 | 115.00 | 113.00 | 111.00 | 109.00 | 107.00 | 104.00 | 101.00 | 97.00 | 93.00 | 89.00 | 85.00 | 80.00 | 74.00 | 69.00 | 64.00 | 58.00 | 53.00 | 65.00 | 65.00 | 65.00 | 65.00 | 65.00 | 65.00 | 64.00 | 64.00 | 63.00 | 62.00 | 61.00 | 60.00 | 59.00 | 58.00 | 57.00 | 56.00 | 55.00 | 55.00 | 54.00 | 53.00 | 52.00 | 52.00 | 51.00 | 129.00 | 201.00 | 113.00 | 113.00 | 161.00 | 113.00 | 138.00 | 138.00 | 155.00 | 116.00 | 156.00 | 117.00 | 134.00 | 166.00 | 119.00 | 127.00 | 160.00 | 120.00 | 153.00 | 201.00 | 121.00 | 146.00 | 154.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 70652-02151-101 | 2 | CT | 1 | 78286 |
| MIL-DTL-22499 | 1 | ZZ | 4 | 81349 |
| MIL-DTL-22499 CP1TY2CL1 | 1 | ZZ | 4 | 80244 |
| SAE-AMS-DTL-22499 | 1 | ZZ | 6 | 81343 |
| MIL-S-22499 CP1TY2CL1 | 9 | ZZ | 4 | 80244 |
| MIL-S-22499 | 9 | ZZ | 4 | 81349 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||