5365-01-210-2347

Machine Thread Plug email this page

Images

Reference images of this national stock number

Model or part number: IR-78

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Undercut below head 0.094 in. Wide by 0.656 in. Dia

Description

Tube Plug NSN 5365-01-210-2347.

NSN 5365-01-210-2347 Datasheet

MRC:

The minimum and maximum pitch diameter limits of a straight screw thread.AAJE

Thread Pitch Diameters:

+0.7142/+0.7175 inches external

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand external

MRC:

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA

Thread Length:

0.160 inches external

MRC:

A measurement from the bottom to the top of the head,in distinction from depth.AASU

Head Height:

0.250 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

0.500 inches

MRC:

The hue or tint of the exterior of the item.ADJS

Exterior Color:

Black head

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

External seat for gasket seal

MRC:

Indicates the type of head provided.AJGD

Head Type:

Solid

MRC:

Indicates the type of body provided.AJGE

Body Type:

Solid

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

20 external

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

0.750 inches external

MRC:

The angle of the end surface upon which the mated surface seats.CQRB

Seat Angle:

90.0 degrees

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel comp 1117

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Aisi c-1117 assn standard single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Oxide

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Plug, machine

MRC:

NIIN:

012102347

MRC:

NATO Stock Number:

5365-01-210-2347

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A208A0

MRC:

INC:

03801

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5365-01-210-2347

An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also plug, protective, dust and moisture seal and cap-plug, protective, dust and moisture seal. Excludes plug, tube fitting, threaded.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

27A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

095190

NMF Description:

Noi Sub 9 Hardware

UFC:

49790

LTL:

70.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
IR-78	2	KZ	5	24047
S4824H3237185 PIECE 16	9	KZ	A	80064
IR78	2	ZZ	5	3HHC6

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5365-01-210-2347

Images

Pricing & Availability

NSN 5365-01-210-2347 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »