5365-01-246-1439

Plate Spacer email this page

Images

Reference images of this national stock number

Model or part number: 3172796-4

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Slot centered between holes along lg

Description

Divergent Flap Slider NSN 5365-01-246-1439.

NSN 5365-01-246-1439 Datasheet

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

Between 0.220 inches and 0.230 inches

MRC:

The measurement between specified points of the slot,in distinction from height.AAZT

Slot Depth:

0.300 inches

MRC:

A measurement of the longest dimension of the slot,in distinction from width.ABGD

Slot Length:

1.700 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

2.920 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

2.350 inches

MRC:

A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ

Inside Corner Radius:

0.120 inches

MRC:

A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE

Aperture Width:

1.240 inches

MRC:

A measurement of the longest dimension of an aperture,in distinction from width.ADUF

Aperture Length:

2.120 inches

MRC:

None.ADUP

Outside Corner Bevel Length Along Width:

Between 0.280 inches and 0.300 inches

MRC:

None.ADUQ

Outside Corner Bevel Length Along Length:

Between 0.280 inches and 0.300 inches

MRC:

A measurement of the center to center distance between the bolt holes along the width.ADUY

Center To Center Distance Between Bolt Holes Along Width:

1.930 inches

MRC:

A measurement of the center to center distance between the bolt holes along the length.ADUZ

Center To Center Distance Between Bolt Holes Along Length:

2.120 inches

MRC:

None.ADVD

Outside Edge To Bolt Hole Center Distance Along Width:

0.400 inches

MRC:

None.ADVE

Outside Edge To Bolt Hole Center Distance Along Length:

0.210 inches

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

Valve 4810-01-238-3382; f-15

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Aluminum alloy 6061

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-a-250/11 federal specification single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Paint

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

Gps3300-1, type i, class e mfr ref single treatment response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Non-circular w/bolt holes

MRC:

NIIN:

012461439

MRC:

NATO Stock Number:

5365-01-246-1439

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A07000

MRC:

INC:

26979

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5365-01-246-1439

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

27AO

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7616995095

NAICS:

332999

End Use Class:

12300

SITC:

69979

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7616995095

Articles Of Aluminum Nesoi

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69979

Articles Of Aluminum, N.e.s.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

095190

NMF Description:

Noi Sub 9 Hardware

UFC:

49790

LTL:

70.0

LCL:

70.0

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) Z

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 59364

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
3172796-4	2	SB	2	59364
3172796-2	9	SB	2	59364

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5365-01-246-1439

Images

Pricing & Availability

NSN 5365-01-246-1439 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »