change location
321-802-5889
321-733-7477
Model or part number: 3538
Fitting Tail Rotor Blade Bushing NSN 5365-01-586-3033.
NSN 5365-01-586-3033 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 2510-01-338-6069 | Fifth Wheel Assembly |
| NSN 5340-01-352-8327 | Angle Bracket |
| NSN 2590-01-354-8114 | Vehicular Components Bracket |
| NSN 6685-01-572-0737 | Pressure Transmitter |
| NSN 4330-01-572-2289 | Fluid Filter Element |
| NSN 4730-01-572-7858 | Pipe To Tube Elbow |
| NSN 5340-01-574-0596 | Dust And Moisture Seal Boot |
| NSN 4820-01-574-0603 | Splash Shield Parts Kit |
| NSN 2530-01-574-0608 | Brake System Air Dryer |
| NSN 4820-01-574-0778 | Safety Relief Valve |
| NSN 2590-01-574-1824 | Filler Opening Cap |
| NSN 5340-01-574-2196 | Access Cover |
| NSN 3040-01-574-3051 | Rigid Connecting Link |
| NSN 5340-01-574-3232 | Dust And Moisture Protective Cap |
| NSN 5340-01-574-3376 | Wire Retainer |
| NSN 4820-01-574-3676 | Check Valve |
| NSN 2530-01-574-4256 | Brake System Air Drier |
| NSN 4440-01-574-6725 | Air Drier Parts Kit |
| NSN 2540-01-574-6804 | Vehicular Seat Cover |
| NSN 4440-01-574-8778 | Air Drier Parts Kit |
| NSN 2540-01-575-1979 | Vehicula Window Regulator Handle |
| NSN 5331-01-577-3943 | O-ring |
| NSN 5950-01-577-7052 | Electrical Coil |
| NSN 4130-01-577-7904 | Control Lens |
| NSN 3040-01-578-0645 | Shouldered Shaft |
| NSN 6210-01-578-3907 | Light Emitting Diode |
| NSN 5935-01-578-3925 | Elec Modular Plug Connector Body |
| NSN 5935-01-578-4064 | Elec Modular Plug Connector Body |
| NSN 5935-01-578-4073 | Electrical Receptacle Connector |
| NSN 2530-01-578-5542 | Pneumatic Tire Wheel Segment |
| NSN 5340-01-578-6281 | Dust And Moisture Protective Cap |
| NSN 4820-01-578-6311 | Calibrated Flow Valve |
| NSN 5305-01-578-8169 | Socket Head Cap Screw |
| NSN 5305-01-578-8645 | Socket Head Cap Screw |
| NSN 5331-01-578-9995 | O-ring |
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes bushing, drill, jig.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Greaseproof-waterproof bag, sealed.
No special type of cargo code applicable.
Bearings.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 3538 | 2 | ZZ | 3 | 0EJ14 |
| 22KP472 | 2 | ZZ | 3 | 45152 |
| 22KP472 | 2 | ZZ | 5 | 75Q65 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||