5365-01-587-5732

Plate Spacer email this page

Images

Reference images of this national stock number

Model or part number: 12506963

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Divergent Flap Slider NSN 5365-01-587-5732.

NSN 5365-01-587-5732 Datasheet

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

0.500 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

3.880 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

1.500 inches

MRC:

An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM

Overall Thickness:

0.500 inches

MRC:

A measurement of the center to center distance between the bolt holes along the length.ADUZ

Center To Center Distance Between Bolt Holes Along Length:

1.240 inches

MRC:

None.ADVE

Outside Edge To Bolt Hole Center Distance Along Length:

1.330 inches

MRC:

None.ADVJ

Bolt Hole Centerline To Nearest Edge Distance:

0.750 inches

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

2320-01-540-2038 truck, utility

MRC:

The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY

Product Name:

Spacer, hood hinge

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Astm b633 assn standard single material response or astm a576 assn standard single material response or astm a108 assn standard single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Zinc

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

Astm b633, type ii, class fe/zn 25 assn standard single treatment response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Non-circular w/square corners

MRC:

NIIN:

015875732

MRC:

NATO Stock Number:

5365-01-587-5732

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A07000

MRC:

INC:

26979

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Utility Truck NSN 2320-01-540-2038 Parts and components for this end application.

NSN	Component Description
NSN 5340-01-550-1757	Mounting Bracket
NSN 5360-01-551-0831	Torsion Helical Spring
NSN 2540-01-552-1631	Small Arms-fr Supplemental Armor
NSN 2540-01-552-1719	Small Arms-fr Supplemental Armor
NSN 5963-01-554-5406	Standardized Electronic Module
NSN 5963-01-554-5675	Standardized Electronic Module
NSN 2540-01-554-6401	Small Arms-fr Supplemental Armor
NSN 5365-01-554-6601	Shim
NSN 5365-01-554-6619	Plate Spacer
NSN 5340-01-554-6671	Double Angle Bracket
NSN 5340-01-554-6683	Mounting Plate
NSN 5340-01-554-6707	Angle Bracket
NSN 6350-01-554-7818	Alarm Control
NSN 5340-01-554-7879	Double Angle Bracket
NSN 5340-01-554-8280	Webbing Strap
NSN 5340-01-554-8286	Mounting Bracket
NSN 5340-01-554-8290	Retaining Strap
NSN 5365-01-554-8295	Shim
NSN 5365-01-554-8305	Shim
NSN 5330-01-554-8341	Nonmetallic Special Shaped Seal
NSN 5330-01-554-8423	Nonmetallic Channel Seal
NSN 5306-01-554-8447	Eye Bolt
NSN 5365-01-554-8590	Shim
NSN 5340-01-554-8593	Mounting Plate
NSN 5340-01-554-8594	Mounting Bracket
NSN 2540-01-554-9198	Small Arms-fr Supplemental Armor
NSN 2540-01-554-9419	Small Arms-fr Supplemental Armor
NSN 2540-01-554-9913	Small Arms-fr Supplemental Armor
NSN 2540-01-554-9929	Small Arms-fr Supplemental Armor
NSN 2540-01-554-9977	Small Arms-fr Supplemental Armor
NSN 2540-01-555-0038	Small Arms-fr Supplemental Armor
NSN 9905-01-555-2895	Instruction Plate
NSN 4710-01-555-6995	Metal Tube Assembly
NSN 2510-01-560-1159	Vehicular Window
NSN 2590-01-560-2737	Vehicular Components Bracket

Formal Definition

Government issue definition of NSN 5365-01-587-5732

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.

Recent Solicitations Most recent solicitations for NSN 5365-01-587-5732

End Date

Solicitation

Qty

Purchase Request

End Date:

2022-04-04

Solicitation:

SPE4A722T048N

Qty:

769

Purchase Request:

0093637189

End Date:

2019-07-05

Solicitation:

SPE4A619T28N0

Qty:

689

Purchase Request:

0080394159

End Date:

2016-11-16

Solicitation:

SPE4A617T5777

Qty:

283

Purchase Request:

0066325669

End Date:

2015-11-12

Solicitation:

SPE4A616T5157

Qty:

209

Purchase Request:

0061114883

End Date:

2015-09-10

Solicitation:

SPE4A615TKJ10

Qty:

Purchase Request:

0060237234

End Date:

2015-08-12

Solicitation:

SPE4A615THB85

Qty:

Purchase Request:

0059782442

End Date:

2015-07-17

Solicitation:

SPE4A615TEQ20

Qty:

Purchase Request:

0059317722

End Date:

2015-06-09

Solicitation:

SPE4A615TCH86

Qty:

Purchase Request:

0058777734

End Date:

2015-05-08

Solicitation:

SPE4A615TAB19

Qty:

Purchase Request:

0058235764

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

194120

NMF Description:

Washers/gaskets/pckg Dvcs Noi

UFC:

95100

LTL:

Rating variable

LCL:

WCC:

596

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Aviation Supply Chain

08/16	11/16	02/17	06/17	09/17	04/18	03/19
36.00	36.00	36.00	36.00	33.00	275.00	568.00

Manufacturers

This NSN is registered to the following cage codes.

Cage 19207

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
12506963	2	ZZ	1	19207

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5365-01-587-5732

Images

Pricing & Availability

NSN 5365-01-587-5732 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Parts and Components for Utility Truck NSN 2320-01-540-2038 Parts and components for this end application.

Formal Definition

Recent Solicitations Most recent solicitations for NSN 5365-01-587-5732

Packaging & Dimensions

Packaging Codes Definitions:

Freight

Freight Codes Definitions:

DLA History / Forecast Quantities

Manufacturers

Compare Now »