5930-00-522-1794

Push Switch email this page

Images

Reference images of this national stock number

Model or part number: 9999-6001-001

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Push Button Switch NSN 5930-00-522-1794.

NSN 5930-00-522-1794 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL

Body Style:

Bushing mounted

MRC:

The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM

Body Diameter:

Between 0.365 inches and 0.385 inches

MRC:

A measurement of the longest dimension of a bushing,in distinction from width.ABXD

Bushing Length:

Between 0.240 inches and 0.260 inches

MRC:

A measurement of the longest dimension of the body,in distinction from width.ADAQ

Body Length:

Between 0.395 inches and 0.425 inches

MRC:

The length of a straight line which passes through the center of the actuator,and terminates at the circumference.AFUR

Actuator Diameter:

0.375 inches

MRC:

None.AFUS

Actuator Height:

0.309 inches

MRC:

The hue or tint of the actuator.AFVA

Actuator Color:

Red single actuator

MRC:

The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.AFXE

Maximum Voltage Rating In Volts:

115.0 ac

MRC:

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA

Inclosure Type:

Fully enclosed

MRC:

Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL

Features Provided:

Actuator seal

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

0.250 inches

MRC:

The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.CRLD

Nonpile-up Contact Arrangement:

1 pole, single throw, normally open, momentary action single switch unit

MRC:

The amount of current the contacts are rated to make or break at maximum rated voltage,with a specified load.CXQR

Contact Load Current Rating At Maximum Rated Voltage:

1.000 amperes resistive ac

MRC:

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST

Test Data Document:

81349-mil-s-8805 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

MRC:

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD

Thread Series Designator:

Uns

MRC:

Indicates the type and number of terminals for providing electrical connection.TTQY

Terminal Type And Quantity:

2 tab, solder lug

MRC:

NIIN:

005221794

MRC:

NATO Stock Number:

5930-00-522-1794

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A053A0

MRC:

INC:

00406

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.

Temp And Simulator

Formal Definition

Government issue definition of NSN 5930-00-522-1794

A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes light-switch; light-switch assembly; switch, beam selecting, headlight; switch, foot; switch, interlock; switch, pressure; switch, push-pull; switch, sensitive and switch assembly. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter, motor and controller, motor.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

XXX

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) ZZ

See j.4.1.B.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8536509035

NAICS:

335931

End Use Class:

20005

SITC:

77255

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8536509035

Button, Rated At Over 5 A, For A Voltage Not Exceeding 1, 000 V Switches, Push

End Use Code 20005

Electric Apparatus

Standard Intl. Trade Class (SITC) 77255

Switches For Electrical Apparatus, N.e.s., For Voltages Not Exceeding 1, 000 Volts

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

061300

NMF Description:

Circuit Breaker/switch Noi

UFC:

34410

LTL:

77.5

LCL:

WCC:

72D

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 72D

Communications/electronics, other than sigint/ew or comsec repair parts and components.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
9999-6001-001	2	TX	1	50027
30-251R	2	TX	3	81073
312-990-061-662	2	TX	5	90073
C5237	2	TX	5	98869
4-30634.0001//M	2	ZB	4	A3026

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5930-00-522-1794

Images

Pricing & Availability

NSN 5930-00-522-1794 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

End Items and Platforms

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »