» » » 5930-01-141-5368

5930-01-141-5368

Dust and Moisture Seal Boot

5930011415368

Request A Quote

Part Number:
Quantity: Condition:
Company Name: Phone:
Full Name: Email:
Company Privacy Policy    

Item Specifics

Federal Supply Class (FSC)
Switches
National Item ID Number (NIIN)
011415368
Overall Height
0.105 inches minimum and 0.120 inches maximum ABKW
Mounting Device Quantity
1 ACUP
Body Outside Diameter
0.650 inches minimum and 0.677 inches maximum ADAR
Mounting Method
Threaded hole AXGY
Opening Inside Diameter
0.461 inches minimum and 0.472 inches maximum BGKC
Material
Rubber silicone body MATT
Style Designator
Thru-hole STYL
Test Data Document
81349-mil-b-5423 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). TEST
Specification/standard Data
81349-mil-b-5423/16 government specification ZZZK

Item Identification | Switches

5930-01-141-5368, A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. sealing may be either static or dynamic. the item may include mounting hardware (support plates, clamps and the like). excludes bellows, protection; grommet, nonmetallic; and cable nipple, electrical. see also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5930 Nov 01, 1982 011415368 19302 (Boot, Dust And Moisture Seal)

End Item Applications NSN 5930-01-141-5368 end item applications/platforms

Item Identification Guide

NSN Reference Drawing

Dust And Moisture Seal Boots Cross Reference

Part Number CAGE Variation
M5423/16-1 Cage Code 81349 Cross Ref. Part
M5423/16 Cage Code 81349 Cross Ref. Part
M5423/16-001 Cage Code 81349 Cross Ref. Part
M5423/16A Cage Code 81349 Cross Ref. Part
M5423/16-01 Cage Code 96906 Cross Ref. Part
M5423/16-1 Cage Code 96906 Cross Ref. Part
MS25196/32-341 Cage Code 96906 Cross Ref. Part
M5423/16-01 Cage Code 81349 Original Part
MIL-B-5423/16 Cage Code 81349 Non-Difinitive Specification
437-6726903-7 Cage Code 53711 Cross Ref. Part
531-6985692 PN 009 Cage Code 53711 Cross Ref. Part
703-7069236-4 Cage Code 53711 Cross Ref. Part
H655-1310- PN 009 Cage Code 96169 Cross Ref. Part
5180-9615 ITEM 33 Cage Code 88898 Cross Ref. Part
5180-9715 ITEM 33 Cage Code 88898 Cross Ref. Part
5180-9815 ITEM 33 Cage Code 88898 Cross Ref. Part
0561C0029 Cage Code 03538 Cross Ref. Part
M5423/16-01 Cage Code 53711 Cross Ref. Part
1426A-1-1-11.2 Cage Code 81312 Cross Ref. Part
32-341 Cage Code 81640 Cross Ref. Part
32-341-20PSI Cage Code 81640 Cross Ref. Part
TS10368 Cage Code 91929 Cross Ref. Part
457-5864 Cage Code A486G For Reference Only
5330005746704 Cage Code SCY13 Superseded, Discontinued, or Replaced

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 063250 Break Switches Air
Universal Freight Code UFC 34410
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 72D Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC H Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
Air Special Handling ASH Array No special handling required.

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
8538907080 Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
ZZ Department Of The Navy ZZ
DSOR MOE Rule NIMSC
No MOE rules found for this NSN.

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS P Indicates there is no information in the hmirs. the nsn is in a fsc in table ii of fed std 313 and a msds may be required by t
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Management Rec. / Rep. Code: Special program consumables

 CTL: 9B-----

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management AH – Lgm-30 minuteman
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.

Marines

Stores Account 1 – Marine corps stock fund account item.
Combat Essentiality 6 – Critical repair part to a non-combat essential end item. those parts or components whose failure in a non- combat essential en
Management Echelon B – All commodities
Material Identification
Operational Test
Physical Category 1 – Bin

Marines Code Definition

Stores Account (SAC) Indicates the type of funds employed within the marine corps in supply support operations.
Combat Essentiality (CEC) Establishes if an item is essential to the operational readiness of a weapon system or the conduct of a military mission, or that a functional part contributes to the tactical and essential operations of an item component or assembly, and its failure would render the item inoperable or incapable of fulfilling its mission.
Management Echelon (MEC) Classifies items into categories by material and procurement echelon.
Material Identification (MIC) Identifies method of accounting, degree, and type of control to be maintained for the item and to identify material by specific purpose, type, or classification for the war reserve system.
Operational test (OTC) Indicates special procedures must be performed on an item of supply while under care-in-stores or as a part of the issue process.
Physical Category (PCC) Indicates category for picking, packing, and marking items for shipment.

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 Q – Electronics materiel (dla/gsa items)
Material Category 2 2 – Stock fund secondary items
Material Category 3 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5 00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.