Model or part number: 12347631-3
This product is available in the following quantities and conditions.
Total: 34 Note: Availability of this item was last updated 09/25/2023, and may have changed since then. Request a quote for up to date pricing and availability.
Coaxial Connector Adapter NSN 5935-01-351-2330.
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
NSN | Component Description |
---|---|
NSN 5340-01-100-0483 | Retaining Strap |
NSN 2520-01-168-1483 | Carrier Assembly |
NSN 2510-01-197-5551 | Vehicular Fender |
NSN 2835-01-214-2641 | Nonaircraft Gas Turb Heat Shield |
NSN 5998-01-225-6107 | Circuit Card Assembly |
NSN 5315-01-340-8900 | Headless Straight Pin |
NSN 4730-01-340-8902 | Pipe To Hose Straight Adapter |
NSN 3120-01-340-8903 | Sleeve Bushing |
NSN 5305-01-340-8904 | Hexagon Head Cap Screw |
NSN 4720-01-340-8911 | Nonmetallic Hose |
NSN 9515-01-340-8913 | Armor Plate |
NSN 5340-01-340-8914 | Manual Control Handle |
NSN 2540-01-340-8915 | Accessories Stowage Box Cover |
NSN 5340-01-340-8916 | Mounting Bracket |
NSN 5340-01-340-8918 | Mounting Bracket |
NSN 2510-01-340-8919 | Vehicle Hatch Door |
NSN 3040-01-340-8920 | Mechanical Drive Housing |
NSN 3040-01-340-9598 | Pivot Shaft Assembly |
NSN 2590-01-340-9599 | Duct |
NSN 5930-01-341-4576 | Pressure Switch |
NSN 5340-01-341-4611 | Blank Panel |
NSN 5305-01-341-4615 | Hexagon Head Cap Screw |
NSN 4710-01-341-4624 | Metal Tube Assembly |
NSN 4710-01-341-4625 | Metal Tube Assembly |
NSN 4710-01-341-4626 | Metal Tube Assembly |
NSN 4710-01-341-4627 | Metal Tube Assembly |
NSN 4710-01-341-4628 | Metal Tube Assembly |
NSN 4710-01-341-4629 | Metal Tube Assembly |
NSN 4710-01-341-4643 | Metallic Bent Tube |
NSN 2910-01-341-4647 | Electrical Fuel Pump |
NSN 5340-01-341-4657 | Mounting Bracket |
NSN 5365-01-342-1980 | Plate Spacer |
NSN 2590-01-342-4367 | Protective Shield |
NSN 2530-01-342-5899 | Steering Control Assembly |
NSN 4210-01-343-3486 | Fire Extinguisher Bracket |
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. it is not designed for permanent attachment to a cable, cord, coaxial line, or wire. the physical shape of an electrical connector should not be the determining factor of its name. tee, angle, straight, and y-shaped adapters are all adapter, connector. excludes adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder. for items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
See j.4.1.B.
Electrical Parts Of Machinery Or Apparatus Not Specified Or Included Elsewhere In Chapter 85
Electric Apparatus
Waste and Scrap Of Primary Cells, Primary Batteries and Electric Accumulators; Spent Primary Cells, Etc; Electric Parts Of Mach Or Apps, Nes
No special type of cargo code applicable.
Electrical appliances, small.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
01/16 | 06/16 | 12/16 | 05/17 | 07/17 | 09/18 | 08/18 | 04/19 | 01/20 |
---|---|---|---|---|---|---|---|---|
150.00 | 150.00 | 150.00 | 150.00 | 150.00 | 150.00 | 150.00 | 150.00 | 150.00 |
Code | Definition |
---|---|
FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
NS | New Surplus. New material item purchased from excess inventory. |
OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
SV | Serviceable product. |
AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
Part Number | RNVC | RNAAC | DAC | CAGE |
---|---|---|---|---|
12347631-3 | 2 | AZ | 1 | 19207 |
445AS014MA12 | 2 | ZZ | 1 | 06324 |
HT7002-12-6-8 | 2 | ZZ | 2 | K0720 |
3M7002-12-6-8 | 2 | AZ | 5 | 53387 |
ISOAS150TKA12-1 | 9 | ZZ | 2 | 031M6 |
HT7002-12-6-8 | 9 | ZZ | 2 | K0270 |
3M7002-12-6-8 | 9 | AZ | 5 | 75037 |
901-424S356 | 2 | ZZ | 5 | 31461 |
Name | No. Items | |||
---|---|---|---|---|
[You must be logged in to use lists] |