change location
321-802-5889
321-733-7477
Model or part number: CTD210-1033
This product is available in the following quantities and conditions.
Total: 4 Note: Availability of this item was last updated 06/01/2021, and may have changed since then. Request a quote for up to date pricing and availability.
About this product
Dpdt; load ratings,10 amps at 200 vac and 28 vdc resistive; 4 amps for motor at 200 vac and 28 vdc; 2 amps for lamp at 200 vac and 28 vdc; overload,40 amps dc and 60 amps ac; continuous duty rating; 28 vdc input; 150 ma coil current; 25 milliseconds release time; hermetically sealed; 1.300 in. Max lg; 1.260 in. Max w; 2.977 in. H; polarized; coil suppression; 42 vdc max back emf; track mtd; 10 seconds time delay on operate
Battery Select Undervoltage Detector NSN 5945-01-136-7558.
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special requirements.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
No requirement.
No special type of cargo code applicable.
Communications/electronics, other than sigint/ew or comsec repair parts and components.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 11/16 | 04/17 | 08/17 | 02/18 | 05/18 | 08/18 | 11/18 | 07/18 | 08/18 | 09/18 | 10/18 | 11/18 | 12/18 | 01/19 | 02/19 | 03/19 | 04/19 | 05/19 | 06/19 | 07/19 | 08/19 | 09/19 | 10/19 | 11/19 | 12/19 | 01/20 | 02/20 | 03/20 | 04/20 | 05/20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 36.00 | 35.00 | 9.00 | 26.00 | 26.00 | 25.00 | 20.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 | 7.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| CTD210-1033 | 1 | TX | 5 | 78290 |
| M83726/19-1501W | 2 | TX | E | 81349 |
| MIL-R-83726/19 | 1 | TX | E | 81349 |
| ST5M1243-11045 | 1 | TX | 5 | 76301 |
| TDA-725 | 1 | TX | 5 | 99699 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||