» » » 5975-00-808-4063

5975-00-808-4063

Stuffing Tube

5975008084063

Request A Quote

Part Number:
Quantity: Condition:
Company Name: Phone:
Full Name: Email:
Company Privacy Policy    

Item Specifics

Federal Supply Class (FSC)
Electrical Hardware And Supplies
National Item ID Number (NIIN)
008084063
Thread Class
2a first end AAJD
Thread Length
0.500 inches first end AASA
Thread Length
0.562 inches both ends AASA
Counterbore Diameter
0.500 inches AAWY
Counterbore Depth
0.562 inches AAWZ
Slot Depth
0.093 inches AAZT
Slot Width
0.250 inches ABGC
Slot Length
0.125 inches ABGD
Overall Length
1.250 inches ABHP
Bore Diameter
0.350 inches ABXV
Overall Outside Diameter
1.250 inches ADGA
Bore Length
0.250 inches ADGE
First End Chamfer Depth
0.250 inches ADGP
First Packing Chamber Inside Diameter
0.560 inches ADHM
First Packing Chamber Length
0.688 inches ADHP
Packing Chamber Quantity
1 ADJG
Size
0.350 inches BGBD
First End Chamfer Angle
10.0 degrees CSNZ
Slot Angle
45.0 degrees CTKQ
Special Markings
1 MARK
Material
Plastic polyamide overall MATT
Style Designator
Slotted-double STYL

Item Identification | Electrical Hardware And Supplies

5975-00-808-4063, An item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. may include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5975 Jan 01, 1962 008084063 00882 (Stuffing Tube)

End Item Applications NSN 5975-00-808-4063 end item applications/platforms

  • Antenna  
  • Radar Set Group  

Item Identification Guide

NSN Reference Drawing

Stuffing Tubes Cross Reference

Part Number CAGE Variation
MS17039-1 Cage Code 96906 Cross Ref. Part
M19622/3-001 Cage Code 81349 Original Part
MILS19622-3 Cage Code 81349 Non-Difinitive Specification
K91-0029 Cage Code 20019 Cross Ref. Part
MS17041-1 Cage Code 96906 Superseded, Discontinued, or Replaced

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 061680 Elec Wiring Plugs Etc
Universal Freight Code UFC 34570
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 72D Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC H Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
Air Special Handling ASH Array No special handling required.

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
8543909000 Electrical machines and apparatus parts, nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
YA Brazil YA
YB Spain YB
ZA Australia ZA
ZC Canada ZC
ZF France ZF
ZG Germany ZG
ZH Korea, Republic Of ZH
ZU Greece ZU
ZW Turkey ZW
ZZ United States ZZ
ZZ Department Of The Army ZZ
DSOR MOE Rule NIMSC
No MOE rules found for this NSN.

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS P Indicates there is no information in the hmirs. the nsn is in a fsc in table ii of fed std 313 and a msds may be required by t
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Repairability Z This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Management Rec. / Rep. Code: Special program consumables

 CTL: Q2200X-

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management EH – Electronic components (engineering support at the 88th ose/oss)
Price Validation V – The current standard price has been validated. - the item has been analyzed in conjunction with the zero overpricing program and is in the accepted price range. -the item was procured under open competition and under the competitive arena the price is considered fair and reasonable. -zop or standard price challenges are permissible but must be supported by adequate justification.

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.

Marines

Stores Account 1 – Marine corps stock fund account item.
Combat Essentiality 2 – Non-critical repair part. repair parts or major components whose failure in an end item will not render the end item inoperati
Management Echelon B – All commodities
Material Identification K – Reserved
Operational Test
Physical Category

Marines Code Definition

Stores Account (SAC) Indicates the type of funds employed within the marine corps in supply support operations.
Combat Essentiality (CEC) Establishes if an item is essential to the operational readiness of a weapon system or the conduct of a military mission, or that a functional part contributes to the tactical and essential operations of an item component or assembly, and its failure would render the item inoperable or incapable of fulfilling its mission.
Management Echelon (MEC) Classifies items into categories by material and procurement echelon.
Material Identification (MIC) Identifies method of accounting, degree, and type of control to be maintained for the item and to identify material by specific purpose, type, or classification for the war reserve system.
Operational test (OTC) Indicates special procedures must be performed on an item of supply while under care-in-stores or as a part of the issue process.
Physical Category (PCC) Indicates category for picking, packing, and marking items for shipment.

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 Q – Electronics materiel (dla/gsa items)
Material Category 2 2 – Stock fund secondary items
Material Category 3 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5 00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.