5985-00-275-5097

Variable Attenuator email this page

Images

Reference images of this national stock number

Model or part number: 447A

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Toggle Attenuator NSN 5985-00-275-5097.

NSN 5985-00-275-5097 Datasheet

MRC:

The primary application for which the item is designed.AAFS

Application Design:

Transmission line

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL

Body Style:

Coaxial type

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

6.000 inches

MRC:

The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ

Center To Center Distance Between Mounting Facilities Parallel To Length:

4.875 inches

MRC:

The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR

Center To Center Distance Between Mounting Facilities Parallel To Width:

1.062 inches

MRC:

The distance measured in a straight line from the bottom to the top of an item.ABKW

Overall Height:

1.313 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

1.375 inches

MRC:

A letter or group of letters used to designate the particular coaxial connector series.AHUC

Coaxial Connector Series Designation:

Bnc

MRC:

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.AKEJ

Mounting Facility Screw Thread Series Designator:

Unc

MRC:

The overall limits of decrease of the amplitude ratio of a signal between the input and output of the item,expressed in decibels.ASYD

Overall Attenuation Range In Decibels:

+0.0/+102.5

MRC:

The means by which the attenuation can be varied from the minimum to the maximum setting.ASYF

Attenuation Variation Method:

Stepped

MRC:

The number of intervals at which the item can be set.ASYG

Step Position Quantity:

MRC:

The amount of attenuation between adjacent steps,expressed in decibels.ASYH

Attenuation Per Step In Decibels:

0.5 and 1.0

MRC:

Indicates the type and number of facilities by which the item is mounted.AXHR

Mounting Facility Type And Quantity:

4 threaded hole

MRC:

The minimum and maximum cyclic changes,per unit of time,for which an item is rated.BNGR

Frequency Range:

Between 0.000 hertz and 500.000 megahertz

MRC:

The number of mounting threads on the item measured on a line parallel to the thread axis,including incomplete threads.CGGK

Mounting Thread Quantity:

56 per inch

MRC:

Indicates the type and number of facilities for adjusting the item.CQTQ

Adjustment Device Type And Quantity:

9 knob

MRC:

The general configuration and relative position of the facilities provided for mounting the item.CQYJ

Mounting Facility Pattern:

Four position rectangular

MRC:

The nominal length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.CRYY

Mounting Facility Screw Thread Diameter:

2.000 inches

MRC:

The total opposition (resistive and reactive) to the flow of alternating current,expressed in ohms.CTGG

Impedance Rating In Ohms:

75.0 input-output

MRC:

Indicates the type and number of terminals for providing electrical connection.TTQY

Terminal Type And Quantity:

2 connector, coaxial, female

MRC:

NIIN:

002755097

MRC:

NATO Stock Number:

5985-00-275-5097

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

Yes - DEMIL/MLI
Export Control Information

FIIG:

A223A0

MRC:

INC:

00838

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5985-00-275-5097

A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

100.0000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

PRES MAT:

WRAP MAT:

ICQ:

THK:

TOS:

UCL:

Packaging Codes Definitions:

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 33

Greaseproof-waterproof bag, sealed.

Cushion Material (CUSH) LC

Ppp-c-795, class 1, cellular plastic film cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8529109000

NAICS:

334220

End Use Class:

21400

SITC:

76493

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8529109000

Antenna & Antenna Reflectors Of All Kinds; Parts Suitable For Use Soley Or Principally W/ Apparatus Of Heading 8525 To 8528, Nesoi

End Use Code 21400

Telecommunications Equipment

Standard Intl. Trade Class (SITC) 76493

Parts Of Television Receivers, Radiobroadcast Receivers, Transmission Apparatus For Radio Telephony, Telegraphy, Broadcasting Or Television Etc.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

061700

NMF Description:

Elec Appliances/instruments Noi

UFC:

34580

LTL:

Rating variable

LCL:

77.5

WCC:

72D

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 72D

Communications/electronics, other than sigint/ew or comsec repair parts and components.

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) Q

High sensitivity, category ii, aa&e, classified confidential

Manufacturers

This NSN is registered to the following cage codes.

Cage 80138

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
447A	2	SB	4	80138

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5985-00-275-5097

Images

Pricing & Availability

NSN 5985-00-275-5097 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »