5985-01-056-8556

Radio Frequency Transmission Line Switch email this page

Images

Reference images of this national stock number

Model or part number: D1-413A30

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Attenuator Electronic Switch NSN 5985-01-056-8556.

NSN 5985-01-056-8556 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL

Body Style:

Rectangular

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

1.850 inches

MRC:

The distance measured in a straight line from the bottom to the top of an item.ABKW

Overall Height:

1.340 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

0.500 inches

MRC:

The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB

Frequency Rating:

8.0 gigahertz 3rd frequency voltage standing wave ratio and 12.4 gigahertz 3rd frequency voltage standing wave ratio

MRC:

The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.AEBV

Unthreaded Mounting Hole Diameter:

0.116 inches

MRC:

Indicates the type of switch included in the item.AEEA

Switch Type:

Transfer

MRC:

The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW

Voltage Standing Wave Ratio:

1.50 4th

MRC:

The difference in the amount of energy available before and after the insertion of an apparatus in a transmission system,expressed in decibels.AHTX

Insertion Loss In Decibels:

0.40 3rd

MRC:

A letter or group of letters used to designate the particular coaxial connector series.AHUC

Coaxial Connector Series Designation:

Sma

MRC:

The design of the connector end.AHUD

Connector End Design:

Female

MRC:

The minimum amount of isolation the item offers against interference from adjacent channel operation,expressed in decibels.AKNV

Minimum Crosstalk Rating In Decibels:

60.0 single

MRC:

The means provided for switching the actuator from one position to another.AKPC

Actuator Operating Method:

Solid state

MRC:

The actuator current type and amount of electron flow at which the item is designed to operate,expressed in amperes.AKPE

Actuator Current Type And Rating In Amps:

0.15 dc

MRC:

The value/s/,or range of values,of potential for which the item is rated,expressed in volts.AKPJ

Actuator Voltage In Volts:

28.0

MRC:

An indication of whether the lobe of the rotating cam is designed to actuate /make/ a switch before or after the preceding switch deactuates /breaks/.AKPN

Switch Operation Sequence:

Makes before breaks

MRC:

The time required for switching between any two adjacent positions.AKPP

Switching Time:

15.0 milliseconds

MRC:

The operation of the switch mechanism when the switch return actuator power is removed.AKPQ

Switch Return Mechanism Type:

Fail-safe

MRC:

The number of coupling positions provided.AKRC

Coupling Position Quantity:

MRC:

Indicates the type and number of facilities by which the item is mounted.AXHR

Mounting Facility Type And Quantity:

2 unthreaded hole

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Copper alloy contact (s)

MRC:

An indication of the precious material and its location in the item.PMLC

Precious Material And Location:

Contact surfaces gold

MRC:

Identification of the precious material contained in the item.PRMT

Precious Material:

Gold

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Nickel body outside surfaces

MRC:

Indicates the type and number of terminals for providing electrical connection.TTQY

Terminal Type And Quantity:

2 turret and 3 receptacle, coaxial

MRC:

NIIN:

010568556

MRC:

NATO Stock Number:

5985-01-056-8556

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A158A0

MRC:

INC:

05298

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5985-01-056-8556

An item specifically designed for mechanically or electronically positioning one or more radio frequency transmission line sections so as to couple it or them to other sections in a radio frequency transmission line system. The switching function may be operated by a manual actuator, an electromechanical actuator or by means of an arrangement of semiconductors and passive circuit devices. Excludes relay, (as modified).

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 41

Watervaporproof bag, sealed.

Cushion Material (CUSH) NA

Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8529109000

NAICS:

334220

End Use Class:

21400

SITC:

76493

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8529109000

Antenna & Antenna Reflectors Of All Kinds; Parts Suitable For Use Soley Or Principally W/ Apparatus Of Heading 8525 To 8528, Nesoi

End Use Code 21400

Telecommunications Equipment

Standard Intl. Trade Class (SITC) 76493

Parts Of Television Receivers, Radiobroadcast Receivers, Transmission Apparatus For Radio Telephony, Telegraphy, Broadcasting Or Television Etc.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

061300

NMF Description:

Circuit Breaker/switch Noi

UFC:

34410

LTL:

77.5

LCL:

WCC:

723

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 723

Radio parts and equipment, excluding tubes packed separately.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 08719

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
D1-413A30	2	TX	E	08719

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5985-01-056-8556

Images

Pricing & Availability

NSN 5985-01-056-8556 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »