change location
321-802-5889
321-733-7477
Model or part number: 12282624
About this product
Array,capacitor 6,array,diode 4,board,printed circuit 1,connector 1,semiconductor device,diode 4,relay 1,resistor 4,thyristor 1
Printed Card Assembly NSN 5998-01-073-0157.
NSN 5998-01-073-0157 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5340-00-678-3472 | Seal Retaining Plate |
| NSN 5340-00-708-3883 | Manual Control Handle |
| NSN 2835-00-937-5844 | Nonaircraft Gas Turb Heat Shield |
| NSN 1015-00-968-6329 | Operating Lever Breechblock Cam |
| NSN 6625-01-059-4279 | Test Probe |
| NSN 6680-01-060-7175 | Vibrating Reed Tachometer |
| NSN 2530-01-063-5655 | Compensating Shaft |
| NSN 3040-01-063-5657 | Rigid Connecting Link |
| NSN 3040-01-063-5658 | Linear Actuating Cylinder |
| NSN 2530-01-063-5666 | Vehicular Wheel Hub |
| NSN 2530-01-063-5668 | Track Suspens Pivot Arm Assembly |
| NSN 2530-01-063-5670 | Track Shoe Wedge |
| NSN 5330-01-063-5676 | Packing Retainer |
| NSN 5340-01-063-5825 | Metallic Solid Wheel |
| NSN 5305-01-063-5829 | Hexagon Head Cap Screw |
| NSN 5330-01-063-5839 | Seal Retainer |
| NSN 3130-01-063-5845 | Bearing Unit Housing |
| NSN 2530-01-063-5862 | Wheel Hub Cap |
| NSN 5340-01-065-6142 | Mounting Bracket |
| NSN 5340-01-065-6143 | Mounting Bracket |
| NSN 2520-01-067-2281 | Friction Clut Intermediate Plate |
| NSN 3010-01-067-2319 | Shaft Coupling Half |
| NSN 2520-01-067-3873 | Transmission Fluid Cooler |
| NSN 2520-01-067-3899 | Friction Clutch Assembly |
| NSN 5330-01-068-4072 | Gasket |
| NSN 4730-01-069-3369 | Pipe Bushing |
| NSN 4730-01-069-3370 | Pipe Bushing |
| NSN 4710-01-069-5925 | Metal Tube Assembly |
| NSN 5310-01-070-2837 | Matche Spring Tension Washer Set |
| NSN 5340-01-071-9051 | Mounting Bracket |
| NSN 5340-01-071-9052 | Mounting Bracket |
| NSN 1015-01-072-4176 | Breechblock Handle |
| NSN 5315-01-072-4488 | Threaded Straight Pin |
| NSN 2910-01-072-9927 | Electrical Fuel Pump |
| NSN 2520-01-072-9943 | Transmission Fluid Cooler |
A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Esd sensitive electronic device requirements of mil-std-129 apply.
Unheated general purpose.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
No requirement.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
No special type of cargo code applicable.
Electrical appliances, small.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 12282624 | 2 | AZ | 1 | 19207 |
| XM65928 | 2 | AZ | 5 | 12204 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||