change location
321-802-5889
321-733-7477
Model or part number: 120139-001
About this product
Printed wiring board 1; capacitor 50; semiconductor device 21; transistor 13; resistor 99; transformer 5; intigrated circuit 6
Printed Card Assembly NSN 5998-01-282-4311.
NSN 5998-01-282-4311 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5895-00-004-9287 | E Communication Modification Kit |
| NSN 5895-00-009-8975 | E Communication Modification Kit |
| NSN 1290-00-034-2714 | Fire Control Eq Modification Kit |
| NSN 5995-00-351-5720 | Radio Frequency Cable Assembly |
| NSN 5995-00-351-5798 | Radio Frequency Cable Assembly |
| NSN 5995-00-351-5927 | Radio Frequency Cable Assembly |
| NSN 5995-00-351-5938 | Radio Frequency Cable Assembly |
| NSN 5995-00-351-6173 | Radio Frequency Cable Assembly |
| NSN 5995-00-401-4207 | Radio Frequency Cable Assembly |
| NSN 5995-00-401-4209 | Radio Frequency Cable Assembly |
| NSN 4730-00-731-0593 | Valve Input Plug |
| NSN 6150-00-738-2466 | Electrical Power Cable Assembly |
| NSN 6150-00-738-2468 | Electrical Power Cable Assembly |
| NSN 6150-00-738-2469 | Electrical Power Cable Assembly |
| NSN 5955-00-851-6498 | Quartz Crystal Unit Set |
| NSN 3020-01-015-7251 | Sheave |
| NSN 6150-01-047-0879 | E Special Purpose Cable Assembly |
| NSN 5895-01-100-7938 | E Communication Modification Kit |
| NSN 5895-01-123-4800 | Commu Controller |
| NSN 5998-01-127-5701 | Circuit Card Assembly |
| NSN 7025-01-139-4452 | Magpot Sensor |
| NSN 2990-01-158-1406 | Exhaust Muffler |
| NSN 5962-01-161-7514 | Digital Microcircuit |
| NSN 5962-01-161-7517 | Digital Microcircuit |
| NSN 2520-01-174-5907 | Clutch Cover And Plate |
| NSN 2530-01-180-8497 | Kingpin Parts Kit |
| NSN 3040-01-183-0209 | Manual Control Lever |
| NSN 5365-01-183-8911 | Axle And Spring Spacer |
| NSN 2510-01-190-3587 | Panel Underbody Sill |
| NSN 5895-01-197-0023 | Frequency Mixer Stage |
| NSN 5895-01-197-0206 | Instantaneous Frequency Receiver |
| NSN 6680-01-201-8273 | Liquid Quantity Transmitter |
| NSN 5895-01-207-8892 | Instantaneous Frequency Receiver |
| NSN 5895-01-211-9135 | Instantaneous Frequency Receiver |
| NSN 2990-01-213-9614 | Emission Con Vacuum Bleed Filter |
A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
See j.4.1.B.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
Electrostatic sensitive device (esd).
Communications/electronics, other than sigint/ew or comsec repair parts and components.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 120139-001 | 2 | MC | 2 | 92755 |
| 120139-001 | 9 | MC | 2 | 25512 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||