change location
321-802-5889
321-733-7477
Model or part number: 12561704
Printed Card Assembly NSN 5998-01-363-6401.
NSN 5998-01-363-6401 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4820-00-332-0083 | Shuttle Valve |
| NSN 1240-00-491-9676 | Elbow Telescope |
| NSN 5365-00-801-6754 | Ring Spacer |
| NSN 3020-00-816-6370 | Helical Gear |
| NSN 1025-01-070-3179 | Lower Gun Shield |
| NSN 4210-01-083-5734 | Fire Extinguishing Tube Assembly |
| NSN 4710-01-084-0026 | Metal Tube Assembly |
| NSN 5315-01-213-7923 | Headless Straight Pin |
| NSN 3040-01-236-0232 | Mechanical Drive Housing |
| NSN 5330-01-254-9804 | Nonmetallic Channel Seal |
| NSN 1025-01-292-0959 | Obturator Spindle |
| NSN 7025-01-307-5519 | Display Unit |
| NSN 5340-01-314-8176 | Access Cover |
| NSN 6150-01-315-1487 | Branched Wiring Harness |
| NSN 5975-01-315-1870 | Junction Box |
| NSN 6150-01-315-3986 | Branched Wiring Harness |
| NSN 6150-01-315-3987 | Branched Wiring Harness |
| NSN 6150-01-315-3988 | Branched Wiring Harness |
| NSN 6150-01-315-3989 | Branched Wiring Harness |
| NSN 6150-01-315-3990 | Branched Wiring Harness |
| NSN 5340-01-315-4974 | Mounting Bracket |
| NSN 6150-01-315-4979 | Branched Wiring Harness |
| NSN 6150-01-315-4980 | Branched Wiring Harness |
| NSN 2510-01-315-5000 | Vehicular Operation Panel |
| NSN 5340-01-315-5186 | Blank Panel |
| NSN 5340-01-315-5220 | Composit Plate Assy |
| NSN 5340-01-315-5221 | Composite Armor Plate Assy |
| NSN 3040-01-315-5228 | Hub Clamp |
| NSN 5340-01-315-6280 | Mounting Bracket |
| NSN 5340-01-315-6281 | Mounting Bracket |
| NSN 5340-01-315-6282 | Mounting Bracket |
| NSN 6220-01-315-6283 | Light Housing |
| NSN 6220-01-315-8126 | Light Housing |
| NSN 3040-01-315-8127 | Bevel Gearshaft |
| NSN 5340-01-315-8150 | Mounting Bracket |
A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Esd sensitive electronic device requirements of mil-std-129 apply.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
No requirement.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
Electrostatic sensitive device (esd).
Computing equipment, computer components, and circuit cards.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 12561704 | 2 | TX | A | 19200 |
| 12561704 | 9 | ZZ | 5 | 0MVU3 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||