change location
321-802-5889
321-733-7477
Model or part number: 21-43902
Electronic Shielding Wire Mesh Strip NSN 5999-01-365-2465.
NSN 5999-01-365-2465 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5915-01-161-8145 | Band Pass Filter |
| NSN 5915-01-161-9578 | Radio Frequency Interfere Filter |
| NSN 5930-01-161-9584 | Rotary Switch |
| NSN 5930-01-163-6255 | Rotary Switch |
| NSN 5915-01-165-5332 | Band Pass Filter |
| NSN 5925-01-166-2847 | Circuit Breaker |
| NSN 5985-01-170-6433 | Waveguide Switch |
| NSN 5962-01-175-8583 | Digital Microcircuit |
| NSN 5925-01-244-4011 | Circuit Breaker |
| NSN 5935-01-244-9481 | Plug Dummy Connector |
| NSN 5985-01-245-1026 | Antenna Subassembly |
| NSN 5935-01-245-3422 | Electrical Connector Cover |
| NSN 5935-01-245-5436 | Electrical Receptacle Connector |
| NSN 2540-01-276-3598 | Tarpaulin |
| NSN 6660-01-276-6583 | Meterological Rod |
| NSN 5915-01-322-8551 | Radio Frequency Interfere Filter |
| NSN 5935-01-323-6925 | Electrical Connector Backshell |
| NSN 5910-01-324-0500 | Paper Dielectric Fixed Capacitor |
| NSN 5935-01-324-0647 | Electrical Connector Cover |
| NSN 5935-01-324-0649 | Electrical Connector Backshell |
| NSN 5935-01-324-0656 | Electrical Connector Backshell |
| NSN 5935-01-324-0657 | Electrical Connector Backshell |
| NSN 5985-01-324-0670 | Antenna Support |
| NSN 5935-01-324-1153 | Electrical Connector Backshell |
| NSN 5985-01-324-1327 | Radio Frequency Reflect Isolator |
| NSN 5905-01-324-2303 | Nonwire Wound Variable Resistor |
| NSN 5999-01-324-2319 | Electronic Shielding Gasket |
| NSN 5999-01-324-2320 | Electronic Shielding Gasket |
| NSN 5999-01-324-2321 | Electronic Shielding Gasket |
| NSN 5999-01-324-2322 | Electronic Shielding Gasket |
| NSN 5915-01-324-2357 | Band Pass Filter |
| NSN 5935-01-324-2416 | Electrical Connector Backshell |
| NSN 5935-01-324-2417 | Electrical Connector Backshell |
| NSN 5935-01-324-2418 | Electrical Connector Backshell |
| NSN 5935-01-324-2422 | Electrical Connector Guide |
A resilient knitted mesh consisting of a multiplicity of interlacing wire loops. It is manufactured in various cross-sectional shapes and may include fins. It includes items designed for mechanical and/or electronic use. Item may contain a resilient core or be impregnated with a resilient compound, such as rubber or plastic to provide for weather sealing. For items made by weaving and/or welding wires to form meshes, see wire fabric. For items shaped from this material, see shielding gasket, electronic. Excludes braid, wire; wire cord; and weather strip.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Preserve in accordance with any of the following alternate methods (used for gaskets and similar items): (a) seal in bags conforming to class b, c or e of mil-dtl-117, using stiffening material internally if needed to maintain rigidity. (b) preservation method 42 or 44. (c) place between sheet of, or in fold of, corrugated fiberboard of sufficient stiffness to resist bending, overwrap with waterproof wrapping paper conforming to ppp-b-1055 and seal with pressure sensitive tape conforming to astm-d5486 or adhesive conforming to mmm-a-260. authorization to use other waterproof barrier materials may be granted upon request.
No requirement.
Electrical Machines and Apparatus Parts, Nesoi
Electric Apparatus
Parts Of Electrical Machines and Apparatus, Having Individual Functions, N.e.s.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 21-43902 | 2 | TX | E | 07700 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||