NSN 6105-00-090-2400 Datasheet
Add to Compare
MRC:
The distance measured in a straight line from the bottom to the top of an item. AAJT
Overall Height:
23.125 inches
MRC:
A measurement of the longest dimension of an item,in distinction from width. AAJU
Overall Length:
28.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness. AAJV
Overall Width:
22.906 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness. ABRR
Keyway Width:
0.5000 inches single end
MRC:
A measurement from the top surface to the bottom of the keyway groove. ABRV
Keyway Depth:
0.2500 inches single end
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference. ABWV
Shaft Diameter:
2.1245 inches single end
MRC:
A measurement of the longest dimension of a keyway,in distinction from width. AFYS
Keyway Length:
1.6250 inches single end
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end. AKCT
Shaft Rotation Direction:
Clockwise single end or counterclockwise single end
MRC:
The working period under which the item was designed to operate. AKPS
Duty Cycle:
Intermittent
MRC:
An indication of the feature/s/ of the inclosure. ANPZ
Inclosure Feature:
Dripproof protected-15 deg
MRC:
The required purpose or application for which the item is designed. ANTN
Specific Use:
Cargo hoist hydraulic pump
MRC:
Indicates the specific arrangement in which wire is wound on a form or is formed by winding. AXCP
Winding Type:
Induction-squirrel cage
MRC:
The means of attaching the item. AXGY
Mounting Method:
Fixed base
MRC:
Indicates the type and number of facilities by which the item is mounted. AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
The acceptable time limits for the item. BFLT
Time Interval:
30.0 minutes on
MRC:
The means of cooling used to maintain the required operating temperature of the item. BFMF
Cooling Method:
Self-ventilated
Keyway Center To Shaft End Distance:
0.9380 inches single end
MRC:
The means by which the current is rated. BKPB
Current Rating Method:
Load
MRC:
The government or industrial specification or standard that defines the inclosure feature. BKPQ
Inclosure Specificationification:
Mil-std-108
MRC:
Indicates the type of bearing provided. BYDT
Bearing Type:
Annular ball
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item. CBBL
Features Provided:
Horizontal mounting position
MRC:
A designation indicating the frame size by which the item is identified. CNMM
Frame Size Designation:
405
MRC:
The amount of electrical energy that can be dissipated. CNXS
Power Rating:
40.0000 horsepower output
MRC:
A measurement of the longest dimension of the shaft projection of an item,in distinction from width. CWCS
Length Of Shaft From Housing:
2.250 inches single end
MRC:
The distance between the center of the shaft to the mounting surface. CWDM
Shaft Center To Mounting Surface Distance:
10.000 inches single end
MRC:
The nominal center to center distance between the mounting facilities parallel to the length. CWDT
Center To Center Distance Between Mounting Facilities Parallel To Length:
13.750 inches
MRC:
The temperature at which the item is designed to operate. CWDY
Tempurature Rating:
40.0 operating degrees celsius
MRC:
The speed rating of a rotor,expressed in revolutions per minute. CWFX
Rotor Speed Rating In Rpm:
1175.0 single no load and 1200.0 single full load
MRC:
The nominal center to center distance between the mounting facilities parallel to the width. CWFY
Center To Center Distance Between Mounting Facilities Parallel To Width:
16.000 inches
MRC:
The amount of current for which an item is rated,expressed in amperes. CWGL
Current Rating In Amps:
50.000 single input
MRC:
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts. CWGQ
Connection Type And Voltage Rating In Volts:
440.0 line to neutral single input
MRC:
An indication of the characteristic(s) of the shaft end. CWHZ
Shaft End Characteristic:
A10 single style single end
MRC:
The number of alternating current phases. FAAZ
Phase:
Three input
MRC:
The cycles per second /hertz/ of the alternating current. FREQ
Frequency In Hertz:
60.0 input
MRC:
Indicates the type and number of terminals for providing electrical connection. TTQY
Terminal Type And Quantity:
3 wire lead
NATO Stock Number:
6105-00-090-2400
NSN 6105-00-090-2400 Datasheet
