change location
321-802-5889
321-733-7477
Model or part number: E1416A
About this product
Frequency: 100 khz/50 ghz, 75 ghz/110 ghz sensor dependent; power range: m70 to p44 dbm,(100 pw to 25 w), sensor dependent; dynamic range: 50 db in 10 db ranges; results units: w, dbm (absolute), pct., db (relative); accuracy: instrumentation: absolute mode: porm 0.02 db or porm 0.5 pct., add sensor linearity percentage for ranges 4 or 5; zero set: porm 0.5 pct. Of full scale on most sensitive range, divide by 10 for each higher range, porm 1 count; power reference: 1.00 mw (50 mhz oscillator factory set to porm 0.7 traceable to nist
Plug In Assembly NSN 6625-01-397-6369.
NSN 6625-01-397-6369 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
An electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. the basic instrument cannot function without one or more plug-in units (as required) in position.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 2.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Esd sensitive electronic device requirements of mil-std-129 apply.
Unheated general purpose.
Preserve by method 52 as follows: item shall be cleaned, wrapped, blocked and braced in an interior carton fabricated in accordance with astm-d5118, class domestic. mil-prf-131 barrier material, sealed as required, shall be utilized around the first container. the cushioning, to be specified under the cushioning code and in the thickness required to adequately protect the item, shall be placed between the barrier and the outer container.
Parts and Accessories Of Articles Of Schedule B Subheading 9030.39
Measuring, Testing, Control Instruments
Parts and Accessories For Instruments and Apparatus (except Meters) Measuring Etc. Electrical Quanities and Devices Measuring Etc. Ionized Radiations
No special type of cargo code applicable.
Instruments, scientific.
Arms/weapons (all types including inert component parts). when a 2" is indicated in the first position, then the special handlin.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| E1416A | 2 | ZZ | 5 | 1LQK8 |
| E1416A | 9 | ZZ | 4 | 1MY97 |
| E1416A | 9 | ZZ | 4 | 28480 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||