change location
321-802-5889
321-733-7477
Model or part number: 11472323
About this product
There are 8 counter-bore holes - each 0.136-1.69" nad 0.320x100 degrees;holes are in pairs with one hole 0.500" from either side; centers pf 1st pair are 0.750" from end,2nd pair centers are 8.500" from 1st pair;3rd are 17.000" from 1st,and 4th are 25.500" from 1st
Plastic Trim NSN 9330-01-472-7482.
NSN 9330-01-472-7482 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4730-01-446-8462 | Quick Disconnect Coupling Half |
| NSN 4730-01-446-9057 | Tube Coupling Assembly |
| NSN 5935-01-446-9067 | Electrical Receptacle Connector |
| NSN 4730-01-446-9203 | Quick Disconnect Coupling Half |
| NSN 4730-01-446-9235 | Quick Disconnect Coupling Half |
| NSN 4720-01-447-1008 | Nonmetallic Hose Assembly |
| NSN 4720-01-447-1407 | Nonmetallic Hose Assembly |
| NSN 4720-01-447-1446 | Nonmetallic Hose Assembly |
| NSN 4720-01-447-1494 | Nonmetallic Hose Assembly |
| NSN 4720-01-447-1501 | Nonmetallic Hose Assembly |
| NSN 4720-01-447-1519 | Nonmetallic Hose Assembly |
| NSN 5935-01-447-1898 | Electrical Connector Backshell |
| NSN 5935-01-447-1934 | Electrical Plug Connector |
| NSN 5935-01-447-2207 | Electrical Connector Backshell |
| NSN 5935-01-447-2210 | Electrical Connector Backshell |
| NSN 5935-01-447-2215 | Electrical Connector Backshell |
| NSN 5935-01-447-2219 | Electrical Connector Backshell |
| NSN 5935-01-447-4381 | Electrical Plug Connector |
| NSN 5930-01-447-4473 | Rotary Switch |
| NSN 5930-01-447-4484 | Push Switch |
| NSN 5935-01-447-4664 | Electrical Receptacle Connector |
| NSN 5935-01-447-6169 | Electrical Receptacle Connector |
| NSN 4730-01-447-7918 | Tube Reducer |
| NSN 4730-01-447-8042 | Self-sealing Coupling Half |
| NSN 4720-01-447-8129 | Nonmetallic Hose Assembly |
| NSN 5925-01-447-9767 | Circuit Breaker |
| NSN 4730-01-448-1673 | Tube Coupling |
| NSN 4730-01-448-4209 | Self-sealing Coupling Half |
| NSN 5962-01-448-4707 | Hybrid Microcircuit |
| NSN 5930-01-448-5416 | Pressure Switch |
| NSN 5930-01-448-5422 | Pressure Switch |
| NSN 4320-01-448-6109 | Rotary Pump |
| NSN 3040-01-448-6683 | Straight Shaft |
| NSN 3040-01-448-6794 | Spring Mounti Block |
| NSN 4730-01-448-7133 | Self-sealing Coupling Half |
A cellular, solid or laminated plastic material including plastic film furnished in widths of 6 inches (152.4mm) or less. It includes plastic material cut to specific lengths or a continuous roll form. It may include fillers, reinforcements or pigments. For items which have definite rated electrical characteristics, see tape, insulation, electrical. Excludes plastic material, cellular; dry transfer sheet.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
Plates, Sheets, Film, Foil & Strip, Cellular, Of Other Plastics
Other Industrial Supplies
Plates, Sheets, Film, Foil and Strip Of Plastics, N.e.s., Cellular
No special type of cargo code applicable.
Plastic fabricated materials incl containers, pallets, sheets and other plastic material.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 11472323 | 2 | ZZ | E | 18876 |
| 11472323 | 2 | ZZ | E | 49956 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||