9390-00-514-0908

Nonmetallic Special Shaped Section email this page

Images

Reference images of this national stock number
Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908 Reference of NSN 9390-00-514-0908

Model or part number: LS38540-1

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Rubber Extrusion NSN 9390-00-514-0908.

pdf NSN 9390-00-514-0908 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Bumper strip
MRC:
The element,compound,or mixture of which the jacket is fabricated.AARR
Jacket Material:
Plastic, polytetrafluoroethylene
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
55.0 shore durometer a and 65.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 300.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.200 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.800 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
120.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Tear resistant and low temperature and high temperature
MRC:
None.AJJC
First/top Flange Thickness:
0.100 inches
MRC:
None.AJJH
First/top Flange Width:
1.020 inches
MRC:
None.AJJS
Right Side Offset To End Distance:
0.900 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
--
NIIN:
005140908
MRC:
--
NATO Stock Number:
9390-00-514-0908
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A547D0
MRC:
--
INC:
30219
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 9390-00-514-0908

A structural shape fabricated from nonmetallic material(s) having a peculiar preformed cross-sectional form. It may have a reinforcing agent(s) and backing. Excludes seal, nonmetallic special shaped section.

Recent Solicitations Most recent solicitations for NSN 9390-00-514-0908

End Date
Solicitation
Qty
Purchase Request
End Date:
2022-08-08
Solicitation:
SPE8E522T3953
Qty:
98
Purchase Request:
0095245647
End Date:
2020-02-10
Solicitation:
SPE8E520T0710
Qty:
149
Purchase Request:
0083205161
End Date:
2018-01-26
Solicitation:
SPE8E518U0013
Qty:
113
Purchase Request:
0072309889
End Date:
2018-01-12
Solicitation:
SPE8E518T1192
Qty:
113
Purchase Request:
0072309889
End Date:
2017-11-06
Solicitation:
SPE8E518T0359
Qty:
161
Purchase Request:
0069653951
End Date:
2016-02-03
Solicitation:
SPE8E516T1304
Qty:
46
Purchase Request:
0061959940

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
1.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
10
PKG:
43Z0
PRES MAT:
00
WRAP MAT:
CA
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
000000
NMF Description:
No Nmfc Freight Description
UFC:
00000
LTL:
No rating
LCL:
--
WCC:
772
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 772

Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Construction & Equipment Supply Chain
09/16
230.00

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide