9390-00-603-7358

Nonmetallic Special Shaped Section email this page

Images

Reference images of this national stock number
Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358 Reference of NSN 9390-00-603-7358

Model or part number: BAC1521-371

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

About this product
Color,white

Description

Rubber Extrusion NSN 9390-00-603-7358.

pdf NSN 9390-00-603-7358 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Bumper strip
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
55.0 shore durometer a and 69.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
2000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 250.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.300 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
None.ADXR
Left Side Top Flange Thickness:
0.060 inches
MRC:
None.ADXS
Right Side Top Flange Thickness:
0.060 inches
MRC:
None.ADYM
Left Side Top Flange Width:
0.600 inches
MRC:
None.ADYN
Right Side Top Flange Width:
0.350 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Flame resistant and oil resistant and weather resistant
MRC:
None.AJGU
First Slot/groove Depth:
0.140 inches
MRC:
None.AJGV
First Offset Height:
0.050 inches
MRC:
None.AJHE
First Slot/groove Width:
0.500 inches
MRC:
None.AJHR
Second Slot/groove Depth:
0.040 inches
MRC:
None.AJJM
Second Slot/groove Width:
0.250 inches
MRC:
None.AJJS
Right Side Offset To End Distance:
0.400 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
--
NIIN:
006037358
MRC:
--
NATO Stock Number:
9390-00-603-7358
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A547D0
MRC:
--
INC:
30219
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 9390-00-603-7358

A structural shape fabricated from nonmetallic material(s) having a peculiar preformed cross-sectional form. It may have a reinforcing agent(s) and backing. Excludes seal, nonmetallic special shaped section.

Recent Solicitations Most recent solicitations for NSN 9390-00-603-7358

End Date
Solicitation
Qty
Purchase Request
End Date:
2023-09-18
Solicitation:
SPE8E923T4917
Qty:
259
Purchase Request:
7004377664
End Date:
2023-08-25
Solicitation:
SPE8E923T4464
Qty:
600
Purchase Request:
7003790380
End Date:
2019-04-29
Solicitation:
SPE8E919T2302
Qty:
235
Purchase Request:
0078812659

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
33
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
46Z0
PRES MAT:
00
WRAP MAT:
CA
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 33

Type ii, shelf life.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
000000
NMF Description:
No Nmfc Freight Description
UFC:
00000
LTL:
No rating
LCL:
--
WCC:
772
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 772

Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide