Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Thermofoil heater
NSN
National Stock Number:
TXT
Description:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Standard element
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.157 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Wire lead
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
12.000 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
25.197 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Camera system, ks 153
MRC:
The number of elements in the item.BHHK
Element Quantity:
1
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
110.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Not rated single voltage
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Etched foil; non-inductive pattern element; 21.6 - 32.40 ohms resistance; 350 degrees f. Temperature limit; 500 volts rms at 60 hz for 1 minute, element to outer surfaces, 1 ma, leakage current, dielectric strength; a.W.G. Number 30, stranded, polytetrafluoroethylene insulated per mil-w-16878, type et, lead wires; kapton insulation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Chromium and iron and nickel alloy resistance wire
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene resistance wire embedding/support insulation
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-55440 assn standard 1st material response resistance wire
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-w-16878, type et military specification 2nd material response resistance wire embedding/support insulation
