Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Groove under flange 0.0625 in. Wide, 0.0610 in. Deep
NSN
National Stock Number:
TXT
Description:
Thrust Washer Bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Shouldered
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.2400 inches and 0.2450 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 3.7080 inches and 3.7180 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.ABMX
Center Hole Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 2.5250 inches and 2.5300 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.7500 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
Between 3.4970 inches and 3.4980 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square first inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square first outside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square fourth outside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square second inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square second outside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square third outside corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 934
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390 federal specification single material response
MRC:
The condition of the item with respect to the texture of the surface.SFCD
Surface Condition:
Ground
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
