Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Chamfered ends 45.0 degrees at 0.015 in. D
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Flatted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved
Second End Groove Width:
Between 0.0180 inches and 0.0200 inches
Second End Groove Diameter:
Between 0.1735 inches and 0.1765 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.800 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Shud, 79-049-12, 1270010948505
MRC:
A measurement of the longest dimension of the flat at the first end,in distinction from width.AMCX
First End Flat Length:
Between 0.0930 inches and 0.0960 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.1230 inches and 0.1270 inches
Second End Distance From End To Groove:
0.060 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.1871 inches and 0.1876 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.415 inches and 0.425 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764 federal specification single material response
