Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Shim channel adapter bracket
NSN
National Stock Number:
TXT
Description:
Plate Spacer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.190 inches and 4.210 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.240 inches and 3.260 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.017 inches and 0.023 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F 16 se
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item has 3 holes .531 in diameter located along the length .975 in from the edge, 1st hole is .35 in from end, 2nd hole is 2.10 in from end, 3rd hole is 3.85 from end with another hole the same diameter located the distance from the end & 2.275 from the edge; there are 2 holes .406 in diameter located along the length .475 from end & 2.637 from the edge that the other holes are along.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 631
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-25043, condition a military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate and oxide
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 type iaw qq-p-35 guidance federal specification 1st treatment response and mil-c-13924, class 4 military specification 2nd treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
