Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Mounting plate, front
NSN
National Stock Number:
TXT
Description:
Mounting Plate
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
3.380 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.187 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.612 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.312 inches first hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.312 inches second hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.348 inches fourth hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.348 inches third hole
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.630 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2320-01-494-7606 and 2355-01-539-3639, both of which are light armored vehicles
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Specific thickness of alum plate is 0.1875 with a grade of t-6; finish is 7.2.2 of mil-std-171, color black; hole one and two are countersunk; hole three is plain, straight through; hole four is a slot with one boundary of 0.348 in nom and second boundry of 0.500 in nom; centerline between hole one and two is 4.000 in nom; centerline between hole three and slot four is 4.331 in nom; outside edge to first hole centerline is 1.060 in nom; outside edge to third hole is 0.875 in nom; stamp or engrave cage and part number characters 0.125 in; unit weight 0.4 lb
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Type t-2, astm 8209 assn standard single material response
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular w/rounded corners
