Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Painted blue or gray for finish
NSN
National Stock Number:
TXT
Description:
Rotary Vacuum Pump Unit
MRC:
The power required to start and operate the item at the actual rated capacity,including all accessories.AAXW
Brake Horsepower Required:
0.250
MRC:
The number of stages incorporated in the item.AAYD
Stage Quantity:
1
MRC:
The number of intake connections included on the item.AAYT
Intake Connection Quantity:
1
MRC:
Indicates the type of intake connection included on the item.AAYU
Intake Connection Type:
Threaded internal
MRC:
The number of discharge connections included on the item.AAYV
Discharge Connection Quantity:
1
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
14.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
8.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.375 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The ultimate maximum vacuum,expressed in terms of absolute pressure,that may be produced by or applied to an item.ADLE
Vacuum Rating:
26.0 inches of mercury
MRC:
The number of pumps incorporated in the item.AENC
Pump Quantity:
1
MRC:
The element,compound,or mixture of which the pump body is fabricated,excluding any surface treatment.AENE
Pump Body Material:
Iron, cast
MRC:
The specific gas with which the item is designed to be used.AENF
Specific Gas For Which Designed:
Air
MRC:
Indicates the type of pumping element included on the item.AENG
Pumping Element Type:
Rotary piston
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
1725.0
MRC:
The volume of the vacuum storage container/s/.AEQE
Err Default:
Err default
MRC:
The volume of air passed per unit of time through an item.AEQH
Air Displacement Rate:
4.0 cubic feet per minute in free air
MRC:
The minimum temperature at which the item is designed to operate.AEQJ
Minimum Operating Temp:
32.0 degrees fahrenheit
MRC:
An indication of the system for which the item is designed.AERP
System Design:
Noncorrosive
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Vacuum control case of a composite repair set
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
1.652
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the intake connection.ASWT
Intake Connection Thread Size And Series/type Designator:
1/4-18 npt
MRC:
Indicates the type of control device provided.BDML
Control Device Type:
Automatic speed regulator
MRC:
Indicates the type of safety device(s) provided.BPRZ
Safety Device Type:
Safety relief valve
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CXBW
Err Default:
Err default
MRC:
Designates the thread diameter and number of threads per measurement scale of the intake connection.CXCD
Err Default:
Err default
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
115.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
