Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Opposite from 0n056896-2; 12 holes 0.146 in. Nom diameter located on each corner of three openings 0.781 in. Nom dia; markings: a34, a6j2, a5j2, a4j2
NSN
National Stock Number:
TXT
Description:
Mounting Plate
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.016 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.090 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
3.066 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.146 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
0.781 inches
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cja
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Holes top and bottom, offset from center
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Aperture
MRC:
The physical configuration of the aperture.CKSX
Aperture Shape:
Round
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aa-q-250/8 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, cl 1a military specification single treatment response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
98230-0n056896 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
