Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pin, protruding, shear head, ph13-8mo cres, hex drive
NSN
National Stock Number:
TXT
Description:
Threaded Pin-rivet
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.820 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.059 inches and 0.069 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.250 inches
MRC:
A substance designed to provide a reduction of friction between the two surfaces in contact.ABAJ
Lubrication:
Cetyl alcohol
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
0.500 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.2500 inches
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
125000 single pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material: ph13-8mo cres per ams5629, heat treat: 125, 000 psi shear per ams2759, finish: aluminum pigmented coating per specification 294 or nas4006, lubricants: cetyl alcohol lube per specification 305
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Aluminum
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Pin-protruding shear head, cres .250" diameter, .2500-28 thread, .500" grip length, cetyl alcohol lube, aluminum coated weight = 6.656 + (8x .849) = 13.448lb per 1, 000 pieces
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
