Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
The mounting holes are 100 degrees csk to a dia. Of 0.337 inches
NSN
National Stock Number:
TXT
Description:
Mounting Plate
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.970 inches and 2.030 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
1.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 6.970 inches and 7.030 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.179 inches all holes and 0.185 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
There are two holes located from left end at a distance of 0.310 inch plus or minus 0.030 inches to bsc; the two holes are located 1.000 inches from bsc of two holes; there are two other holes at right end 6.375 inches from bsc of first set of two to bsc of first set of two to second set of two holes bsc; the first hole is located 1.188 from bsc of first ser of two holes from left end and bsc of first hole, the second hole is located 1.300 inches to bsc of second hole, the third hole is located 1.100 inches from bsc of second hole, the fourth hole is located 1.600 inches from bsc of third hole bsc; all four holes are located 0.500 bsc berween the two holes bsc of either end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2, cl 1 military specification single treatment response
