Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pin, expandable-quick release, assembly, engine aft mount
NSN
National Stock Number:
TXT
Description:
Expanding Grip Pin
Grip Length:
3.300 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
1.370 inches
MRC:
A measurement of the longest dimension of a lanyard.ACHS
Lanyard Length:
12.500 inches
MRC:
The means by which the item is actuated.AFLW
Actuation Method:
Push button
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-18
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
23453 single pound
MRC:
Indicates the type of device that is attached to the pin.CTDJ
Pin Attachment Type:
Cable lanyard w/terminations
MRC:
The nominal length of a straight line which passes through the center of a pin,and terminates at the circumference.CTXN
Pin Diameter:
0.621 inches
Shoulder To Head End Distance:
1.000 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Assembly includes a lanyard 12.5 in long; locking pin 0.80 in; cam pivot pin, 1.000 in diameter with .625 hex both sides; lanyard lug, safety retention ring and spring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed position
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Pin shall be capable of 1000 locking cycles when engaged in a tolerance hole, without varying the cam rotation force by more than 20 percent; mechanical means for retaining the cam in the installed position; lanyard shall be permanetly attatched to the pin in a manner that will not interfere with its operation; pin shall be incapable of operation if the safety retention ring is engaged in the hole; the retention device shall be capable of unlatching with a maximum load of 3 to 5 lbs applied to the finger release provision; .75 lbs weight inc. Lanyard
