Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pilot hole diameter: 2.250 in. ; hub machined surface finish outside length: 0.875 in.
NSN
National Stock Number:
TXT
Description:
Propeller Shaft With Universal J
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.125 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.375 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.562 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.296 inches
First Center To Center Distance Between Mounting Holes:
2.125 inches
Second Center To Center Distance Between Mounting Holes:
1.750 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.750 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
42.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.AEDX
Shaft Style (non-core):
Err-090
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.AGMD
Flange Style:
E1
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
1
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unc
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.625 inches
MRC:
The measured distance from the universal joint spider centerline to the flange outer face.AMBL
Length From Universal Joint Spider Centerline To Flange Outer Face:
1.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Included
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
180 degrees from keyway and 0.625 in. From hub end
MRC:
Designates the thread diameter and number of threads per measurement scale for a threaded securing hole(s).BTBQ
Securing Hole Thread Size Designator:
0.375-16
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the universal joint.BTBT
Universal Joint Style:
C4
MRC:
Indicates the type and location of the end component(s).BTBX
End Component Type And Location:
Universal joint both ends
MRC:
Indicates the type of connection end(s) on the universal joint.BTCC
Universal Joint Connection End Type:
Flange
Distance From Centerline To Keying Facility:
0.750 inches
