Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First leg angle in degrees 88.0 min. 92.0 max.
NSN
National Stock Number:
TXT
Description:
Angle Bracket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.880 inches and 0.920 inches
Second Leg Corner Radius:
Between 0.220 inches and 0.260 inches
First Leg Slot Length:
Between 0.480 inches and 0.520 inches
First Leg Slot Width:
Between 0.200 inches and 0.220 inches
Second Leg Hole Diameter:
0.281 inches
Second Leg Distance Between Hole Centers Along Width:
1.360 inches
Second Leg Distance Between Hole Centers Along Length:
0.380 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.220 inches and 0.260 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.220 inches and 0.260 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.073 inches and 0.083 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.083 inches and 0.087 inches
First Leg Corner Radius:
Between 0.260 inches and 0.300 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.245 inches and 0.255 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.260 inches and 0.300 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One slot
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
