Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
1st leg canted 5 degrees to left of horizontal plane furnished w/2 ea boss fscm 19207 p/n10865360 welded on 2nd leg
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.560 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
3.500 inches
Second Leg Width:
1.000 inches
Second Leg Width:
1.000 inches
Second Leg Corner Radius:
0.250 inches
First Leg Hole Diameter:
0.279 mils and 0.286 centimeters
First Leg Hole Diameter:
Between 0.279 inches and 0.286 inches
Second Leg Hole Diameter:
0.436 mils and 0.443 centimeters
Second Leg Hole Diameter:
Between 0.436 inches and 0.443 inches
Second Leg Distance Between Hole Centers Along Length:
1.840 inches
Second Leg Distance Between Hole Centers Along Length:
1.840 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.500 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.500 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.500 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.250 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.250 inches
Center Section Height:
5.310 inches
Center Section Thickness:
0.250 inches
First Leg Width:
1.000 inches
First Leg Corner Radius:
0.250 inches
First Leg Distance Between Hole Centers Along Length:
0.620 inches
First Leg Distance From Edge To Hole Center Along Width:
0.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
Second Leg Angle:
90.0 degrees
First Leg Offset Angle:
22.25 degrees
Second Leg Offset Angle:
180.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
1st leg canted 5 degrees to left of horizontal plane furnished w/2 ea boss fscm 19207 p/n10865360 welded on 2nd leg
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-698 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset double angle
