Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Item has cutouts; with treadside down, at top left corner, rectangular, 5.000 inches across by 3.000 down; at bottom left corner, rectangular, 1.750 across by 0.500 up; on bottom edge, a semicircular cutout 1.000 radius, centered 28.875 inches from left edge; a 2.000 inch hole is drilled with center 2.250 down from top edge, 25.125 from left edge; finish per class 1a, mil-c-5541
NSN
National Stock Number:
TXT
Description:
Metal Floor Plate
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Rolled
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
25.750 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
45.000 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
1.0000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-369-6028; personnel carriers
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Pattern b
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
40000 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
28000 pounds per square inch
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
T-6 solution heat treated or h-323 strain hardened or h-32 strain hardened
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, mil-f-17132, alloy 6061 or aluminum alloy, qq-a-250/6 or aluminum alloy, qq-a-250/7
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy, mil-f-17132, alloy 6061 or aluminum alloy 5083 or aluminum alloy 5086
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/6 federal specification 2nd material response and qq-a-250/7 federal specification 3rd material response
