Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First end to be counter bored 0.50 inches diameter and 0.25 inches deep; one spline from each end shall be removed so that the arch between each of the removed splines is 129 degrees in a counterclockwise direction when viewed from the first end
NSN
National Stock Number:
TXT
Description:
Suspension Torsion Bar
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 51.630 inches and 51.750 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.309 inches and 1.559 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A measurement of the longest dimension of a chamfer at the first end.ADGN
First End Chamfer Length:
Between 0.130 inches and 0.250 inches
MRC:
A measurement of the longest dimension of a chamfer at the second end.ADGR
Second End Chamfer Length:
Between 0.560 inches and 0.680 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
2.1875 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the first end.AMER
First End Internal Thread Length:
0.880 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
2.0625 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.620 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.620 inches
MRC:
An indication of whether or not a cover is provided.AQHT
Cover:
Not provided
MRC:
Designates the thread diameter and number of threads per inch of the first end.AQSQ
First End Thread Size:
1/2-20
MRC:
Designates the series/type of the threads of the first end.AQSR
First End Thread Series/type Designator:
Unf
MRC:
The structural characteristic of the item.ARQS
Construction:
Solid
MRC:
An indication of the twist direction.ASRX
Twist Direction:
Counterclockwise
MRC:
The geometric configuration of the first end when viewed in cross section.CFGQ
First End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the first end.CFGR
First End Teeth Quantity:
35
MRC:
A measurement of the longest dimension of the serration at the first end,in distinction from width.CFGS
First End Serration Length:
Between 0.810 inches and 0.930 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the first end,and terminates at the circumference.CFGT
First End Major Diameter:
Between 2.2450 inches and 2.2500 inches
MRC:
The pressure angle of the first end,expressed in degrees.CFGW
First End Pressure Angle In Deg:
45.00
MRC:
The geometric configuration of the second end when viewed in cross section.CFGX
Second End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the second end.CFGY
Second End Teeth Quantity:
33
MRC:
A measurement of the longest dimension of serration at the second end,in distinction from width.CFGZ
Second End Serration Length:
Between 0.940 inches and 1.060 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the second end,and terminates at the circumference.CFHB
Second End Major Diameter:
Between 2.1200 inches and 2.1250 inches
MRC:
The pressure angle of the second end,expressed in degrees.CFHC
Second End Pressure Angle In Deg:
45.00
MRC:
Indicates the physical characteristic of the end of the solid bar at the first end.CFHF
Solid Bar End Characteristic At First End:
Threaded hole
MRC:
Indicates the physical characteristic of the end of the solid bar at the second end.CFHG
Solid Bar End Characteristic At Second End:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
