Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Second end has parial bore with unthreaded 0.156 inch diameter located on one side
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Threaded cross drilled (thru hole)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and splined (straight)
Second End Groove Width:
0.0730 inches
Second End Groove Diameter:
Between 0.7490 inches and 0.7500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.125 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.2495 inches and 1.2500 inches
First End Distance From Hole Center To End:
2.094 inches
Second End Distance From End To Groove:
0.437 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.2495 inches and 1.2500 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
Between 0.7490 inches and 0.7500 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
Between 1.0230 inches and 1.0800 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
Between 1.2495 inches and 1.2500 inches
Second End Spline Quantity:
10
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification single material response
