Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.1545 inches and 0.1555 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.250 inches and 1.265 inches
Undercut Diameter:
Between 0.1445 inches and 0.1475 inches
Under Head Length:
Between 1.412 inches and 1.432 inches
Undercut Width:
Between 0.012 inches and 0.014 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Locking mechanism/canopy/t-38 acft
First End Taper Length:
Between 0.037 inches and 0.057 inches
First End Taper Angle:
15.0 degrees
Pin Head Diameter:
Between 0.271 inches and 0.291 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.052 inches and 0.072 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
