Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.081 in. Min. 0.086 in. Max. Diameter hole 0.188 in. Min. 0.193 in. Max. From underside of head and countersunk 90.0 deg. To 0.125 in. Dia. Two places, 0.061 in. Min. 0.065 in. Max. Dia. Hole 0.968 in. From underside of head
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Knurled no. 1
Under Head Length:
Between 2.562 inches and 2.567 inches
First Step Diameter:
Between 0.308 inches and 0.310 inches
First Step Length:
Between 1.850 inches and 1.858 inches
Second Step Diameter:
Between 0.237 inches and 0.240 inches
Second Step Length:
Between 0.704 inches and 0.717 inches
First End Taper Length:
0.030 inches
First End Taper Angle:
30.0 degrees
Pin Head Diameter:
0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.245 inches and 0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, type 303se, cond b federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
