Part Information
Inner conveying tube material-rubber, synthetic

NSN

National Stock Number:

4720-00-540-4296 4720005404296

TXT

Description:

Nonmetallic Hose Assembly

INC

Item Name Code:

20311

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Round

MRC:

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD

Thread Class:

3b 1st end

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand 1st end

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX

Inside Diameter:

Between 0.678 inches and 0.719 inches

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-65.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-65.0 degrees fahrenheit and 200.0 degrees fahrenheit single response

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV

Outside Diameter:

1.219 inches

MRC:

The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH

Minimum Inside Bending Radius:

7.750 inches

MRC:

The specification or standard /industrial or governmental/ that specifically covers the construction of the hose or tubing,excluding the end fittings.ADLF

Hose Or Tubing Specification/std Data:

Mil mil-h-8788, size 12 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

MRC:

The specification or standard /industrial or governmental/ that specifically covers one complete end fitting.ADLG

First End Fitting Specification/std Data:

Mil ms28760-12 standard (includes industry or association standards, individual manufactureer standards, etc.).

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

Swivel nut flare 1st end

MRC:

The physical configuration of the outside of the end connection.AKUU

End Connection Design:

Straight 1st end

MRC:

The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.AKXL

End Fitting Component And Material:

Nipple steel all ends

MRC:

The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.AKXL

End Fitting Component And Material:

Nut steel 1st end

MRC:

The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.AKXL

End Fitting Component And Material:

Socket aluminum alloy 2nd end

MRC:

The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.AKXM

Fitting Component And Surface Treatment:

Nipple cadmium all ends

MRC:

The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.AKXM

Fitting Component And Surface Treatment:

Socket anodize 2nd end

MRC:

The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.AKXM

Fitting Component And Surface Treatment:

Nut cadmium 1st end

MRC:

Indicates the type of connection/s/.AWLS

Connection Type:

Threaded internal tube 1st end

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

12 1st end

MRC:

Indicates whether or not the second end is identical to the first end.CQBB

Second End Relationship With First End:

Identical

MRC:

The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD

Burst Test Pressure:

12000.0 pounds per square inch

MRC:

An indication of whether or not the end has the capability to rotate.CQBG

First End Swivel Action Capability:

Not included

MRC:

The material and formation identifying the structural characteristic/s/ of the item and location.CQCS