Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Knurled no. 1
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.490 inches and 0.494 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.190 inches and 1.210 inches
Undercut Diameter:
Between 0.365 inches and 0.385 inches
Under Head Length:
Between 1.460 inches and 1.580 inches
Undercut Radius:
Between 0.010 inches and 0.030 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.124 inches and 0.129 inches
Distance From Centerline Of Hole To End Of Pin:
Between 1.650 inches and 1.770 inches
First End Taper Length:
Between 0.170 inches and 0.230 inches
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
Between 1.240 inches and 1.280 inches
First End Taper Angle:
29.5 degrees
Pin Head Diameter:
Between 0.590 inches and 0.650 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.350 inches and 0.410 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 431
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-18732, cond ht-115 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove