Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Qtwo t/16-24 unf-28 bolt holes equally spaced on perpendicular centerline, around 2.750 in. Bolt circle around pivot pin hole; shank measurements 1.880 in. Thick, 2.880 in. Wide at fork, tapering to 2.620 in. Wide at end
NSN
National Stock Number:
TXT
Description:
Rod End Clevis
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
4.380 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 2.005 inches and 2.010 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.750 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
2.000 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
3.250 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
0.620 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
2.380 inches
Distance From Pivot Pinhole Center To Rod Connection End:
8.000 inches
Fork Arm Thickness:
0.740 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
3.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns j03001
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-681, 65-35 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-e-529, ovlive drab mfr ref 1st treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
