Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Rod welded to clevis
NSN
National Stock Number:
TXT
Description:
Rod End Clevis
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.120 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
1.120 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Van: expansible, 5 ton, 6x6, m820a2 truck w/o winch (2330-00-050-9010); tm 9-2320-260-20p and 34p-2
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.560 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
0.500 inches
Distance From Pivot Pinhole Center To Rod Connection End:
2.500 inches
Fork Arm Thickness:
0.280 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.120 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
19207-11658730 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
