Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bore grooved 1.580 in. Dia, 0.090 in.Wide at bottom of counterbore, 125 microinch finish both ends, 63 microinch finish on tooth faces, mounting holes counter sunk 90 degreesporm 10 degrees to 0.260 in.Min, 0.280 in.Max both ends
NSN
National Stock Number:
TXT
Description:
Spur Gear
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-115-1579
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
2.8000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
28
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
W/counterbore both ends
MRC:
A designation indicating the backlash quality of an item.BDZQ
Backlash Designation:
Grade a
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for the specific diameter of a threaded mounting hole.CMLK
Mounting Hole Thread Series Designator:
Unc axially through body, first end
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
28 axially through body, first end
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
33.0 rockwell c and 38.0 rockwell c
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
33.0 rockwell c and 38.0 rockwell c
MRC:
A designation that is used for the purpose of general identification of the mounting hole thread.CQLT
Mounting Hole Thread Size:
0.250 inches axially through body, first end
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
4 threaded axially through body, first end
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.998 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.688 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.370 inches both ends
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
0.481 inches first end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
1.575 inches first end
MRC:
The nominal length of a straight line which passes through the center of a bolt hole circle,and terminates at the circumference.CWZN
Bolt Hole Circle Diameter:
2.000 inches axially through body, first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66, aisi/sae federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Hubless
