Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two d shaped holes 0.250 in. Diameter min by 0.235 in. Min, centered 2.530 in. From base, marked j1 and j2
NSN
National Stock Number:
TXT
Description:
Mast Section
MRC:
The formation identifying the structural characteristic of the item.AAJG
Construction:
One-piece
MRC:
A measurement taken at right angles to the length of the base,in distinction from thickness.ACUU
Base Width:
2.500 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Threaded plug and unthreaded holes
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5841-01-256-9395 detecting systems, sp
MRC:
A measurement from the top to the bottom of an item when nested,in distinction from depth.APYX
Nested Height:
7.380 inches
MRC:
A measurement between specified points on the base of an item,in distinction from height.APYY
Base Depth:
2.000 inches
MRC:
A measurement between specified points on the top of an item,in distinction from height.APYZ
Top Depth:
1.750 inches
MRC:
A measurement taken at right angles to the length of the top,in distinction from thickness.ATBE
Err Default:
Err default
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Base plate 0.125 in. Thick w/four 0.213 to 0.216 in. Diameter mtg holes w/clinch fasteners; top plate 0.090 in. Thick w/four 0.203 in. Diameter mtg holes; 1.500 in. Sq tube by 0.120 in. Thick wall
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Chemical film
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Antennas, waveguides, and related equip.
