Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Materials: valve component materials to be compatible with the specifiedtemperatures, pressures and fluid; themetals shall possess adequate corrosion resistant characteristics or shall be protected by the use of suitable coatings to resist corrosion which may result from dissimilar metal contact moisture, high temperature degradation, etc.; rated flow capacity: 25 gpm; proof pressure; 3000 psi with valve and packings mounted to a simulated manifoldwith .750 holes centered at inlet and discharge ports, no external leakage permitted; burst pressure; 4500 psi without failure, rupture or external leakage; the electrical receptacle shall mate with shell assembly-8724233 and be interchangeable with receptacle-7720492; the electrical receptacle gasket shallbe interchangeable with gasket-ms52000-5
NSN
National Stock Number:
TXT
Description:
Solenoid Valve
MRC:
The position of the moving member/s/ controlling flow through the valve with the solenoid in the de-energized position.ADSK
Flow Control Device Normal Operation Position:
Open
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
170.0 degrees fahrenheit single response
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Solenoid
MRC:
The pressure required to actuate the power driven unit.CQCN
Power Drive Operating Pressure:
Between 135.0 pounds per square inch and 1750.0 pounds per square inch
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
2000.0 pounds per square inch single response
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
18.0 dc and 30.0 dc
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Hydrogen 1st response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Oil 2nd response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090