Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pivot yoke-curbside
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
281.7 millimeters
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
190.5 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2320-01-549-8610, truck, cargo
First Leg Hole Diameter:
37.0 millimeters
Second Leg Hole Diameter:
38.1 millimeters
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
19.1 millimeters
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
19.1 millimeters
Center Section Height:
35.0 millimeters
Center Section Width:
130.0 millimeters
Center Section Thickness:
6.4 millimeters
First Leg Distance Between Hole Centers Along Length:
281.7 millimeters
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
En 10149-2, grade s700mc, sheet, 8mm thk. Min 100ksi field strength assn standard 1st material response and astm a572/a572m, grade 60, plate, hot rolled. 0.75 inch thk assn standard 2nd material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
1920-71-242-0325
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
