Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Battery tie down, sponson
NSN
National Stock Number:
TXT
Description:
Battery Retainer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
28.560 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.680 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
13.600 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Armored reconnaissance airborne assault vehicle cage 19207 p/n 12466201
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
6 unthreaded hole all mounting facilities
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item has two 1.00 diameter holes in center and 4 oval hoels two on each end that are 0.410 to 0.470 hign and 0.540 to 0.600 long; item has 4 cut outs that aer 5.03 wide and 12.84 long
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel or steel comp 1010 or steel comp 1012 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1025
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a36 assn standard single material response or astm a108 1010 through 1025 assn standard 1st material response or astm a576 1010 through 1025 assn standard 1st material response and astm a1011 cs or ds type a or b assn standard 2nd material response or astm a1008 cs or ds type a or b assn standard 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular with/without mounting holes
