Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Nonmetallic Channel Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Open channel
MRC:
The means used to attach the item.ABSX
Attachment Method:
Round hole
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
42.969 inches
MRC:
The number of attachment features included.ADTL
Attachment Feature Quantity:
16
MRC:
The length of a straight line which passes through the center of an attachment hole,and terminates at the circumference.ADTM
Attachment Hole Diameter:
Between 0.344 inches and 0.406 inches
MRC:
The length of a straight line which passes through the center of the circle on which the attachment features are aligned,and terminates at the circumference.ADTQ
Attachment Feature Circle Diameter:
44.000 inches single circle
Web Width:
Between 1.000 inches and 1.060 inches
Left Side Flange Height:
Between 0.600 inches and 0.653 inches
Right Side Flange Height:
Between 0.600 inches and 0.653 inches
Left Side Flange Thickness:
Between 0.130 inches and 0.160 inches
Right Side Flange Thickness:
Between 0.130 inches and 0.160 inches
Web Thickness:
Between 0.060 inches and 0.100 inches
Left Side Flange Thickness At Web:
Between 0.130 inches and 0.160 inches
Right Side Flange Thickness At Web:
Between 0.130 inches and 0.160 inches
Left Flange Fillet Radius At Web:
0.031 inches
Left Flange Outer Radius At Web:
0.031 inches
Right Flange Fillet Radius At Web:
0.031 inches
Right Flange Outer Radius At Web:
0.031 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
Left Inside Angle:
90.0 degrees
Left Outside Angle:
90.0 degrees
Right Inside Angle:
90.0 degrees
Right Outside Angle:
90.0 degrees
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the left tip.CTNK
Left Tip Style:
Left full radius
MRC:
An indication of whether or not the right tip is identical to the left tip.CTNL
Right Tip Relationship With Left Tip:
Identical
Left Tip Radius:
0.060 inches
Right Tip Radius:
0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Special quality control testing
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Certified free from mercury contamination
